#acl EditorsGroup:read,write,delete,revert All:read
#language en

<<TableOfContents(2)>>

= TINE Server does not work =
 * Check if tine server process is running ''via ps''
 * Check if cshosts.csv contains the right ENS entries (in '''${TINE_HOME}''')
 * Check if at '''${INTLK_CONFIG}''' the file config.ini exists and if it is configured correctly, it should look like this:

{{{
intlk.tineserver.fec.context=INTLK4_SYSTEMS
intlk.tineserver.fec.exportname=INTLK4_SYS1
intlk.tineserver.fec.subsystem=DEFAULT
intlk.tineserver.fec.hardware=Stamp9G20
intlk.tineserver.fec.portoffset=0
intlk.tineserver.fec.description=Interlock 4 Test System
intlk.tineserver.fec.responsible=grev/machau
intlk.tineserver.fec.location=30B/157
intlk.tineserver.fec.eqm=MHFPINTLKXFEL1

i4ds4.mappingfile=map_doocs.csv
i4ds4.destip=131.169.148.34
i4ds4.destport=5058
i4ds4.ignoreServerReprate=true
i4ds4.reprate=5
}}}
/!\ The following settings '''MUST BE INDIVIDUAL FOR EACH SYSTEM''':

 * intlk.tineserver.fec.exportname
 * intlk.tineserver.fec.eqm

Otherwise, the ENS server will refuse the 2nd TINE server that is trying to register itself at the ENS and the TINE Server will not be reachable.

= FADC Signal does not show any signal =
 * Check if hardware inverter is configured correctly on RIO module
 * Check if adcTrigger is setup correctly
 * Check if system receives a machine clock

= DOOCS Server does not receive data =
 * Check if prosess i4ds4 is running in the Interlock system ''(use ps in command shell)''
 * Check if i4ds4.destip ''(in config.ini)'' is setup correctly
 * Check if i4ds4.destport ''(in config.ini)'' is setup correctly
 * Check if the doocs server is running
 * Check if doocs server does have IP CHECK enable, if yes
 * Check if correct pair ip address ''(ip of interlock system)'' is entered in the DOOCS property CRATE_IP_ADDR

= Controller doesn't boot up =
 * Check, if controller fpga has firmware loaded (red led "conf" must be off)
 * TBC.