ATLAS

Here we will try to collect some words, abbreviations and other stuff that is important or at least useful to know about the pixel detector and it's operation.

Contents

  1. A
  2. B
  3. C
  4. D
  5. F
  6. H
  7. M
  8. O
  9. P
  10. Q
  11. R
  12. S
  13. V


A

Alarm Screen

Is the tool to look for current warnings and error messages concerning the detector. You can log in remotely (in case you have a P1 account) by typing e.g. rdesktop -g 1250x900 -a 16 -k de -d cern cerntsatldcs.cern.ch

B

Bakeout Panel

Special panel showing package temperatures and humidity values.
choose from pixellcs12}} on {{{rdesktop -g 1250x900 -a 16 -k de -d cern cerntsatldcs.cern.ch

BOC

Back-Of-Crate cards recieve signals from the optoboards.

C

Calibration Console

Central DAQ tool to do calibrations, scane and analyses on the detector. See shifter info for details.

D

Data Quality (DAQ)

Detector Control System (DCS)

The DCS monitors the current (and past) status of the detector, includes the software and hardware interlock control as well as the environmental information.

DORIC

Digital Optical Receiver IC chip. Digitises the signals received by the PIN diodes on the optoboards.

Data Point Entry (DPE)

One specific item in the PVSS database. It as a name and an alias. Look here for details.

DRX

Digital Receiver IC chip. Digitises the signals received by the PIN diodes on the BOCs.

F

Finite State Machine (FSM)

The FSM is the tool to represent the detector status and transitions from one status to another (also in DCS shifts). You can log in remotely (in case you have a P1 account) by typing e.g.
rdesktop -g 1250x900 -a 16 -k de -d cern cerntsatldcs.cern.ch

H

HV

High voltage for the modules to create the depletion zone. (150V, O(muA))

M

Module

Thereis 1744 modules in the detector each consisting of 16 front ends (FEs). Six to seven build up one half-stave. Label example: L1_B04_S2_A7_M3A

Module Controller Chip (MCC)

O

Octant

Subgroup of the detector in $\phi$. N=8

P

PIN diode

Positive-intrinsic-Negative diodes. Used to receive the signals send by the VCSELs

Powercycle

Process of switching off an on the module(s).

ProzessVisualisierungs- und SteuerungsSystem (PVSS)

Software and data base to monitor and control the detector and to store the DCS data.

PVSS Data Viewer

Tool to look at PVSS data. PDV on TWiki

Q

Quadrant

Subgroup of the detector in $\phi$. Each contains two octants. N=4

R

Read Out Driver (ROD)

S

Scan, Analog

Scan, BOC

Scan, Inlink

Scan, Inlink/Outlink

Scan, Threshold

Sector

Stave

There are 272 halv-staves in the detector, each with six to seven modules connected to it.

V

VCSEL

Vertical Cavity Surface Emitting Lasers. Used to send signals from the optoboards to the BOCs and vice versa.

VDC

VCSEL Driver Chip. Receives the electrical signals from up to seven modules and converts them to VCSEL drive current signals.

VDD1_I, VDD1_V

Digital current and voltage of the pixel modules.
(disks: 2.0V, ~700mA; barrel: 2.1V, ~350mA)

VDDA1_I, VDDA1_V

Analog current and voltage of the pixel modules.
(disks: 1.6V, ~1.2A; barrel: 1.7V, ~80mA)

VISet_I, VISet_V

Current and voltage that determine the laser power of the VCSEL array(s).

VVDC_I, VVDC_V

Digital current and voltage of the pixel modules.

ATLAS: Projects/Pixel/Glossary (last edited 2009-05-06 17:26:16 by SaschaMehlhase)